|
The first thing you will notice when you look
at The PoolCleaner is that it is of the highest
quality. The PoolCleaner is robust and if
maintained properly will result in many years
of pool cleaning. We use only the highest
quality materials to ensure the best pool
cleaning products. The PoolCleaner is
proudly made in the USA. This cleaner was
invented, designed and built with years of
experience in the pool industry. Every cleaner
is tested to insure the
finest quality.
SELF ADJUSTING TURBINE VANES
All the POOLCLEANER cleaners have the patented self-adjusting turbines, which maximizes the power
from the water flow and allow for the easy passage of large debris.
STEERING SYSTEM
The POOLCLEANER has an internal programmed steering system, that causes the left wheel to
periodically reverse, allowing the POOLCLEANER to turn and then move into another direction. The
2x Suction POOLCLEANER travels 8 to 10ft before turning. (Turns ranging from 90 to 450 degrees)
This feature allows the POOLCLEANER to cover not only the deep end, but also the shallow end.
The 2 Wheel POOLCLEANER is intended for most average sized pools and comes with approx 33 ft of hose.
ROBUST TIRE TREADS
One look and you will see that the patented tire treads give the POOLCLEANER better climbing ability
and obstacle maneuverability. This makes the POOLCLEANER ideal for all pool surfaces and shapes.
ADJUSTABLE SKIRT
The POOLCLEANER has patented adjustable skirts that allow the cleaner to maintain optimal suction
under the machine even when it encounters obstacles.
AUTOMATIC BYPASS VALVE
The POOLCLEANER comes with a patented automatic bypass valve that regulates the suction to the
POOLCLEANER. This bypass valve regulates the suction so that the POOLCLEANER does not
exceed the optimal 11-13 RPM (revolutions per minute). This Bypass Valve serves another important
purpose. Should your POOLCLEANER get clogged by an object the valve will snap into a completely
open position, preventing your pump from running dry. Once in this completely open position the system
must be turned off, the cause of the problem identified and solved, and then the Bypass Valve must be
manually reset. |
